Auto Crane

Capacity: 38,000 ft lb (5.3 tM)
Storage Space: 60" Standard:
99.14 cu/ft (2.81 cu/m) for 46" Tall
104.29 cu/ ft (2.95 cu/m) for 58" Tall
84" Standard:
121.8 cu/ft (3.45 cu/m)
84" Tall -- 127.2 cu/ft (3.60 cu/m)
Applicable Service Cranes: 2003, 3203H, 3203EH, 4004EH, 5005EH, 5005H, 6006EH, 6406H
Cargo Floor: 50" (1.27 m)
Features / Benefits
Heavy-duty performance and extended service life:

Patented one-piece 10 gauge (3.6mm) side-pack design for rugged, offroad use minimizes weld seams for less cracking and rust
12 gauge (2.8mm) tread plate on tops and cargo area for added durability
Integral crane box transfers load directly to outriggers reducing stress on the chassis -- reinforced up to 38,000 ft lb (5.3 tM)
Internal stainless steel hinges reduce potential corrosion points
Double-paneled galvanneal doors for added strength
Gas shock door closers reduce wear-and-tear
Rounded door corners throughout reduce effect of load on stress points
Flush door panels with bulb seal gasket and functional full-length drip rail for dryer compartments
Fully undercoated for rust prevention

Safety and security built in:

Fully stable throughout lifting radius of the crane for maximized crane capacity
Large, flush-mounted, angled, stop-tail-turn lights for better visibility
Six heavy-duty tie downs for payload security
Three-point latching system provides secure door closures
Fenderettes add protection to the body at the wheel well
Rounded door corners throughout reduce effect of load on stress points
Best-in-class Two-Year Limited Warranty

Productivity enhanced:

Unobstructed crane compartment maximizes usable cargo space
Double-paneled, slammable tailgate for one hand ease-of-use
Complete shelf package to optimize storage needs

Chassis Requirements:

11,200 GVWR; 5080 GVM
34" (864 mm) frame rail width
Dual rear wheels -- 93.75" (2.38 m) overall width
14,500 lb (6,577 kg) chassis required for cranes in excess of 25,000 ft lb (3.46 tM)
Truck stability will govern the actual approved working loads that will apply at different points of rotation
Actual chassis requirements should be determined by adding weight of body, crane, accessories, and anticipated cargo

Note: It is the responsibility of the crane installer to comply with OSHA Truck Crane stability requirements as specified by 29 CFR Part 1910.180 (c) (1)
Options:

Manual or hydraulic outriggers
12" (305 mm) heavy-duty bumper
20" (508 mm) workbench storage bumper
Receiver hitch
Rope and dome lights for compartments
Flood lights
Crane boom support
Individual drawer units
Drop-well for front compartment
Slide-out tool tray
Adjustable shelving
Lockable sliding tops
Master locking system
Grab handles
Oxy/acetylene bottle holder

Ameri-Tech Equipment Manufacturer Brands

Adrian Steel
Auto Crane
BF Goodrich Tires
Brand FX
B&W Trailer Hitches
Century Caps
Crysteel
Dur-a-Lift
Fab Fours
Go Industries
Haul-All
Kargo Master
Knapheide
Labrie
Maxon
Monroe Truck Equipment
MPH
Otto
Ramsey
Rigid Industries LED Lighting
RKI
Schwarze
Snyder
Stellar Industries
Supreme
Thieman Tailgates
Tommy Gate
Vanair Mobile Power Solutions
VMAC
Waltco
WARN
Wastequip
Western Snow Plows
Western Mule
Westin
previous arrow
next arrow
Slider

Casper ATEC